MG-Cars.net

Welcome to our resource for MG Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG Midget and Sprite Technical - Heritage shell rebuild (cont.)

Hi to all again. Well, the rebuild continues, at a slow pace! Today however, I came across a new problem; my car is a '65 Sprite mk3, on a Heritage shell. This meant that I had to use the twin brake and master cylinder set up from later cars, and of course the later pedal box arrangement. Ok so far.
Today I fitted the refurbished regulator and Dynamo (big thanks to Dr.John from midget & Sprite Club - a true gent), also the Accuspark distributor and coil. Whilst at it, I attempted to trial fit the heater and blower assembly - and here lies the problem. Whilst the heater (square shape type) will fit, the large blower will not. There is no room for it, if used with the later pedal box.
Have any of you come across this? If so, did you use an alternative blower unit from another vehicle? Any helpful comments would be much appreciated. John.
J M Hutton

quoting from the bible (Horler) p.108 -
"...new pedal box for the 1275 Spridgets. The blower unit was moved closer to the heater unit to allow space for this, but now left insufficient room for the air valve (flap). Initially this was relocated to the front of the ducting pipe behind the radiator grille, but later a new blower intake housed th evalve (see pic).

So you probably need a later blower motor than the one you have, and the mounting brackets to go with it. Richard Woolley does refurbished heater units and is possibly a good source of the right parts. He's at Silverstone next weekend....
David Smith

Thanks for that David. Will consult my copy of the 'Horler Bible'. Not heard of Richard Woolley before, so again appreciate that information. Regards, John.
J M Hutton

Richard posted yesterday in the M&S General section, 'MG LIVE SILVERSTONE'....
David Smith

I have bought a number of parts from Rich Woolley over the last few years. They have always been top notch for a reasonable price, and he's a very nice person to deal with.
dominic clancy

Thanks again David. Hi Dominic, appreciate your comments - still not finished rebuild yet!
J M Hutton

Picture update.


J M Hutton

John
I had the same issue but made an adapter plate to cover the existing cutout to take the original pedal box. I think I had to cut a bit more out at the bottom from memory. Worked out quite well though.
Andy Potter

This thread was discussed between 01/06/2016 and 11/06/2016

MG Midget and Sprite Technical index

This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.