Welcome to our resource for MG Car Information.
MG Midget and Sprite Technical - Midget Door Strikers
Is there more than one size door striker plates for midgets? I have to change mine but now the strikers are to small, the locks will not go in. Any ideas? |
Peter King |
Yes, they did change. I once fitted Mk2 doors to a 1970 Mk3 and had a problem. It wasn't possible to fit the later door catches to the earlier doors as the holes didn't line up, so I had to use fit the early strikers to the B-post to match the doors. |
Dave O'Neill 2 |
This thread was discussed on 26/05/2008
MG Midget and Sprite Technical index
This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.