Welcome to our resource for MG Car Information.
MG Midget and Sprite Technical - Midget Square Wheel Arch Weel/ Tyre Sizes
Hi all Question for you.... i have a 70 square wheel arch midget and want to upgrade the wheels and tyre, whats the max safe size wheel and tyre size i can go to without scuffing the arches?? i have spax on the back so fairly stiff.. Cheers Brett |
B MURCH |
can i get away with 165 70 13s on 5J or 5.5J wheels |
B MURCH |
Brett - I've just posted relevant comment on the 5-1/2" Superlite thread. |
Paul Walbran |
Mine are 165 70 13 on 5.5J wheels. I had to fold the inner lip of the rear arches in (up) a little and they occassionally still just make contact on hard and laden cornering. I really need a Panhard. It will depend on the offset of the wheel as well though. Guy |
Guy Weller |
A mate of mine had/has 185/60 13 tyres on Jensen Healey wheels, 5.5J IIRC, and they rubbed even with jacked out arches but after fitting a Watts linkage no further rubbing. |
David Billington |
mine is RWA so I don't get the arch problem, but with 185/60 x 13 Yokos on 5.5" Cosmics I see contact on the inner face with the leaf spring clips... not immediately obvious so do check carefully |
David Smith |
This thread was discussed between 27/06/2008 and 28/06/2008
MG Midget and Sprite Technical index
This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.