Welcome to our resource for MG Car Information.
MG MGA - temperature gauge replacement
I am rewiring my 1959 MGA convertible and have removed the dash. I need to know if the temperature probe with cable comes off of the gauge and if it does, how do I do it? Do I have to remove the probe from the engine block and thread it thru the firewall or can I remove it fro the gauge. The oil pressure cable screwed off . thanks MIchael Dvorkin |
michael dvorkin |
It must be removed from the engine and pulled out thru the dash. It is a sealed tube so be careful not to kink it, or crack it. They are not cheap to have repaired, or replaced. |
Ed Bell |
This thread was discussed on 24/07/2005
MG MGA index
This thread is from the archive. The Live MG MGA BBS is active now.