MG-Cars.net

Welcome to our resource for MG Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGF Technical - How to install a throttle Tb 52mm

Hi, my F is a 98 1.8i and I would like to know if is difficult to replace my old plastic TB for a new alloy body 52mm, I have also a new K&N 75i kit to install, about this one I have the assembling instructions in the box and it looks like an easy job, but the TB I dont have a single clue. Maybe when I dismantle the old one I figure how to install the new part. Any tips or advices I would appreciate.
Anyway I am still waiting for more than tree weeks for the part from my MGR dealer, and nothing yet.

Thanks,
Joao

Joao Barros Gomes

Nothing to worry about, mate.

- remove engine cover (11 bolts)
- pull off the hoses from the old TB (careful)
- bolt off the S-Shape 70mm hose clamps (K&N kit has one new)
- pull Sensor plug (press on the wire bracket, not pull!!)
http://www.mgfcar.de/teile/Dcp_0653.jpg (not that one, but similar 2 position plug)
- bolt off the four flange bolts of the TB.

Bolt on and plug on reverse and don't forget the hoses. See that the new TB is good sealed against the inlet plenum.
:)
K&N installation of the cold air pipes is anywere else.

HTH
Dieter
Dieter Koennecke

The installation instructions for the K&N are on http://www.mgf.ultimatemg.com

I am now in possession of a 52mm TB, so when I fit it, I'll take a pictorial record and post it - but as Dieter says, it is a direct, bolt-on replacement for the existing TB. :o)
Rob Bell

Which Vauxhall/Opel does it come from? (though I don't think Marion would appreciate my removing the one from her car :-) )

Neil.
Neil

Joao,
Don't forget to reset the throttle after fitting the TB. See "Stepper Motor" thread.
Jason H
Jason H

Hi,

So the external dimensions are exactly the same on the 48mm and on the 52mm, right? And all the hoses will connect the same way and on the same positions?

See João, it looks very easy. Seems we have work to do when the TB arrives... :)

Cheers, Valter.
Valter

>>So the external dimensions are exactly the same on the 48mm and on the 52mm, right? And all the hoses will connect the same way and on the same positions? <<

Absolutely right on both counts Valter. :o)

Have fun! ;o)
Rob Bell

>I am now in possession of a 52mm TB, so when I fit it, I'll take a pictorial >record and post it - but as Dieter says, it is a direct, bolt-on replacement for >the existing TB. :o)

Fancy doing this for direct use in the FAQ mate?
Paul Lathwell

Thanks guys for all the help, now I hope the TB arrives soon, and me and Valter will soon send some info about this assembling, successful I hope :)

bye
João
Joao Barros Gomes

Will copy you the pix Paul :o)
Rob Bell

Valter, Dr Dave has a load in stock for immeadiate shipping, you can order one online at http://shop.mg-rover.org

Steve.
Steve Childs

Steve
Shouldn't that be.......http://www.richardsons-group.com/parts.html
????
Peter Hitchens

Hi guys, today me and Valter installed the K&N and the new alloy TB in my F, the part reference MHB000090, does not mach the two other references that Dieter gave me the other day, that were MHB102140 for the alloy 48mm and the MHB000261 for the alloy 52mm. So I realy don’t know if my TB is a 48mm or a 52mm, I don’t had with me any precise measure equipment, but the car is great with a sound blast throttle response, or maybe could only the K&N make the difference.
Anyway thank you Valter for a nice MG workshop Saturday morning :)
Bye Joao
Joao Barros Gomes

Steve

Great shop with lots of stock who is the supplying agent, you or Richardsons?

Will have to have a look at the throttle body mod!
Rock & A Hardplace

Joao,

got the pictures. Thank you.
I'm afraid but I've currently no idea on what version the part number reffers to.

I'm off now for some sunny vacancie days.
Will be back ón June 4th.

See you
Dieter
Dieter

This thread was discussed between 21/05/2002 and 26/05/2002

MG MGF Technical index

This thread is from the archive. The Live MG MGF Technical BBS is active now.