Welcome to our resource for MG Car Information.
MG TD TF 1500 - Doretti Badge Bar
|Probably like a needle in a haystack, but I'm trying to find a TD Badge Bar made by Moretti in the 50's. The story is at|
I'll try the Parts Wanted Section, but I've not had much luck there in the past. Any leads would be appreciated.
|I knew Moretti made steering wheels (as well as their delicous little Fiat-engined coupe and roadster), but not a badge bar.|
|Gordon A. Clark|
|Bud; I might suggest that you make one from readily available materials.Either way you will have to have it chrome plated.Thick walled 3/4" copper tubing and some brass plate welded to the ends will create just what you need.As you already have all the dimentions needed it should take no longer than 2-3 hours to create a masterpiece. Dorretti parts are extremely rare. I had for some time an owners handbook. It was gobled up in a trice by an eager dorretti owner.|
This thread was discussed between 27/08/2003 and 29/08/2003
MG TD TF 1500 index
This thread is from the archive. The Live MG TD TF 1500 BBS is active now.