Welcome to our resource for MG Car Information.
|
MG TD TF 1500 - TD Floor DIP Switch
Presently assisting a friend with reassembly of a right hand (RH) drive mg td with new cowl & floor boards. The question is: where is the DIP switch located; on the cowl/floor board & attached to? If possible; anyone have a photograph? Also need a photo of throttle pedal attachment to cowl for R/H drive TD. |
Rich Boris |
Hi Rich, Assuming you have a right hand drive mounting for the switch, you will find two holes under the battery, in the metal platform, to my memory about an inch apart. I don't know what head would have been on the two machine screws, but you want as little as possible sticking up into the wooden base under the battery. I think I used a panhead, and filed the head even flatter. It's a two man job any way - the head being held from above, and someone else doing up the nut from below. Hope this helps, Cheers, John |
J C Mitchell |
This is where the bracket is mounted on a RHD car. Rod Will post the picture in the next post :) |
R D Jones |
Dip S/W bracket location. RHD
![]() |
R D Jones |
This thread was discussed on 01/11/2013
MG TD TF 1500 index
This thread is from the archive. The Live MG TD TF 1500 BBS is active now.